Antifouling paint stripper, paints and varnishes MATT CHEM 1L 422M

MATT CHEM - "GREEN" Paint Stripper Antifouling, Paints, Varnishes PEINT OUT G

• Allows for very easy removal of antifouling, synthetic, cellulose or rubber-based paints and all kinds of varnishes.
• Its gel formula allows it to adhere well to vertical surfaces without dripping or splashing.
• Contains no methylene chloride or chlorinated solvents.
• Non-corrosive to metals.

Instructions for use

• Apply with a brush or roller.
• A simple product to use, you just need to apply a layer of gel with a roller or brush depending on the area you want to treat.
• Then leave the product to work for around 30 minutes to 1 hour so that it penetrates deeply, scrape off your antifouling with a flexible metal spatula until you reach your primer.
• Rinse with a water jet to remove the last antifouling patches and the stripper before applying your new antifouling.

If you have a thick layer, the stripper may not reach the bottom layer. In this case, you will have to repeat the operation a second time to reach your primer.

It is advisable to remove the layers of antifouling down to the hull every 4 to 5 layers in order to limit the risk of losing the antifouling due to blistering on the lower layers.

Ref: 422M

1 liter can