OWATROL Gelcoat and Metal Renovator Polytrol Marine 1L PEI0032

POLYTROL

MARINE 1 liter bottle

• Revives the appearance of tarnished gelcoats

• Restores shine to polished metals

As a result of exposure to the elements, the surface of these supports and finishes eventually

become dull, chalk and lose their luster. Unlike traditional polishing methods

complicated and tedious, MARINE POLYTROL® restores their original shine in a few minutes.

Penetrating and wetting:

- Leaves no film on the surface: no risk of flaking.

Rich in resin:

- Fills all the microcavities in the surface, making it waterproof and ensuring long-lasting protection

. Effective on plexiglass.

- Restores the surface layer in a lasting way.

Multifunctional

:

- Renews anodized aluminum. Gives shine to polished, chromed and copper metals...

- Eliminates white rust on lead and zinc.

- Restores a beautiful shine to non-ferrous metals, as well as to stainless and galvanized steel.

- Revives stainless steel and aluminum exposed to harsh weather conditions.

- Revives the color and appearance of tarnished gelcoats.

Recommendations before application

Treat small areas at a time to prevent uncontrolled drying of the MARINE POLYTROL® and

and thus the formation of a harmful film.

Avoid application on hot surfaces or in direct sunlight.

Work on clean, dry surfaces free of grease and silicone stains.

If cleaning is necessary, use a solvent or a mixture of water and detergent on metal.

On plastic, preferably use DECK CLEANER (NET-TROL®). Rinse thoroughly and then

allow to dry for at least 12 hours.

Cover any areas not to be treated.

Test beforehand.

Application

Apply a saturated layer of MARINE POLYTROL® with a soft brush. On metal surfaces, for best results, soak a very fine steel wool (000) with MARINE POLYTROL® and then rub it on the surface. Protect any underlying wood.

Leave for 10 to 20 minutes, then remove the excess product by wiping with a clean, lint-free cloth or paper towel to prevent a film from forming on the surface.

Do not throw the soaked paper or cloths in a trash can without first letting them dry flat in the open air. Allow at least 24 hours before use.

Properties

Coverage: 18 m²/l

Application temperature: +5°C to +35°C

Action time before wiping: 10 to 20 mins