120A Load Distributor (1 Input, 2 Outputs) CRIRCE-PL-120A

Brand : CRISTEC
€147.00
Shipped from 11/25/2026

Description 120A Load Distributor (1 Input, 2 Outputs)

CRISTEC RCE electronic load distributors

120A 1x M6 input and 2 M6 outputs

The RCE+ battery distributors designed by Cristec use the latest MOSFET technology to charge two or three batteries simultaneously with virtually no voltage loss. Battery distributors prevent current from flowing from one battery to another. The voltage drop is less than 0.02 V at low currents and only 0.1 V at higher currents (20 A). These battery distributors also feature special IG terminals that allow them to be used with any alternator. They supply limited power to the alternator's B+ terminal when the ignition is on. RCE+ charge current distributors are equipped with more resistant transistors, which have better thermal behavior when used with lithium batteries. Suitable for 12 V and 24 V installations.

The RCE+ is used to distribute an electrical input source (alternator, solar regulator, hydrogenerator, etc.) to two or three consumers (batteries).

At the RCE+ output, the batteries will be isolated from each other. The MOSFET transistor technology used makes the voltage drop between the input and outputs negligible. The distributor operates with voltages of 12VDC and 24VDC, and also allows the use of LiFePO batteries (lithium) interchangeably.

All outputs are equivalent and can therefore be interchanged.

The choice of distributor rating is determined by the nominal current value of the source. For example, for a 130A alternator, an 180A RCE+ would be chosen

Loading