SUZUKI DF6 Ignition Coil (2005–2012) 33410-91J30

Overview

On multi-cylinder engines, replacing just one ignition coil is enough to restore full ignition. This ignition coil is a direct replacement part for SUZUKI and JOHNSON 4-stroke 4- and 6-cv engines (2005–2012). It generates the high voltage supplied to the spark plugs and ensures reliable spark ignition during each engine cycle. Replacement is necessary in cases of persistent misfires, difficult starting, or a loss of power associated with a identified fault in the ignition system.

Technical Specifications

Recommended usage conditions

Confirm the exact engine model and year of manufacture before ordering. Replace the spark plug at the same time to perform a complete diagnostic check of the circuit. Work with the engine off and the battery disconnected during the procedure. After installation, test cold and hot starts to verify the repair.

Technical Benefits

• Stable and precise high-voltage ignition at all engine speeds
• Protection of windings against moisture and sea spray in marine environments
• Resistance to thermal cycling and vibrations specific to outboard motors
• Direct installation without modifying the wiring harness or original mounting hardware

Usage and Maintenance Tips

• Visually inspect the coil during every major service—cracks or resin seepage indicate advanced wear
• Check the condition of the high-voltage cable and its connectors during each replacement
• Protect electrical connectors with dielectric grease to prevent corrosion in a marine environment

FAQ

How can I confirm that the coil is indeed the faulty part before ordering?

Measure the primary and secondary resistance of the coil with a multimeter and compare the values to the engine maintenance manual. An open-circuit or short-circuit resistance reading confirms the failure. A spark tester can also be used to verify the presence of high voltage at the coil output.

Does replacing the coil require adjusting the ignition timing?

No, in most cases. On modern electronic ignition systems, the timing is managed automatically. On older systems with mechanical timing, check the manufacturer’s manual to ensure that no adjustment is required after the replacement.

Can this coil be used on other models of the same brand?

Only after thoroughly verifying compatibility. Even within the same model line, electrical specifications vary by generation and engine output. Use only the part number that corresponds to the exact model and the engine’s model year.