YAMAHA F75 to F115 and MERCURY fuel pumps REC68V-24410-00

Overview

This fuel pump is designed to supply fuel to Yamaha F75-F100 and Mercury 4-stroke outboard motors. It meets the reliability and precision requirements of modern marine engines operating in humid and saline environments. Compatible with the 75 to 100 hp ranges, this component ensures a steady and reliable fuel supply to the engine.

Applications

• YAMAHA F75 (2003-04), F80A (2002-07), F90 (2003-04), F100A (2002-07), F100B (2003-10), F100C (2001-07), F115A (2000-10)
• MERCURY 75, 80, 90, 100, 115 HP 4-stroke up to 2006

Part Numbers: 880890T1, 880890A02, 8M0091468, 68V-24410-00-00, 6D8-24410-00, 6D8-24410-10

Recommended conditions of use

This part is designed for Yamaha/Mercury engines (75 to 100 hp). Verify compatibility using the engine serial number before installation. Shut off the fuel supply before performing any work. Check for leaks after installation.

Technical Benefits

• Consistent fuel delivery ensuring stable engine performance
• Construction resistant to salty and humid marine environments
• Direct connection to original fittings
• Easy replacement without special tools

Usage and Maintenance Tips

• Replacement frequency: In case of reduced flow, starting difficulties, or confirmed failure. Schedule an inspection during each winter storage.
• Best practices: Check the condition of the upstream fuel filters. Bleed the system during winterization.
• Safety precautions: Do not run the pump dry. Turn off the fuel supply before performing any work on the fuel system.

FAQ

How can I confirm that this pump is compatible with my engine?

Verify that the part number REC68V-24410-00, 68V-24410-00-00 matches the original part for your engine. Your engine’s serial number can be used to confirm the exact match via the Yamaha/Mercury parts catalog.

Can this pump be installed by an experienced boat owner?

Replacing a fuel pump on an outboard motor is a task that can be performed by a knowledgeable user with the appropriate tools. However, it is recommended to have a technician perform this work if there are any doubts regarding compatibility or the fuel system.

What checks should be performed after replacing the pump?

After installation, check all connections for leaks, then test the fuel pressure with a suitable pressure gauge before the first start-up. Run a test at low RPM before normal use.