Stoppani Finisher Epoxy Plaster Putty 0.5L 201117--VDM
Description Stoppani Finisher Epoxy Plaster Putty 0.5L
Stoppani 0.5L Epoxy Plaster Finisher is a two-component, fast-drying epoxy plaster.
It can be applied in layers up to 1 cm thick.
Its creamy consistency allows for a smooth finish.
It can be used on wood, iron, aluminum, and fiberglass, properly treated with suitable primers.
It can be used on any part of the boat, both above and below the waterline.
It is easy to sand in dry or wet conditions.
Can be used with glass fabrics for bonding and laminating or filling holes.
Excellent adhesion, flexible and elastic. It is smooth, hard, waterproof, and easy to sand.
Characteristics:
- Mix A+B: 1:1 (by volume)
- Color: Light gray.
- Application: Spatula.
- Dilution: Ready to use.
- Clean equipment with Epoxy Thinner.
- Drying at 20°C: Dust-free: 3-4 hours.
- Sanding: 24 hours.
- Coverage: 2 m²/liter at 500 dry microns per coat.
In the same range
SuperMarine
TRANSPRENE 113M Neoprene Glue - 250ML box
SuperMarine
Polyester putty 250g
SuperMarine
TRANSPRENE 113M Neoprene Glue - 750ML box
SuperMarine
SuperMarine Epoxy Putty 400g
International
Watertite International Epoxy Putty 0.25L
